This is an easy, yet incredibly effective stepper motor through a 4-wire cable attached.

You are watching: Mercury motor sm-42byg011-25

This is a Bipolar Motor.


Step Angle (degrees) :1.82 PhaseRated Voltage : 12VRated Current : 0.33AHolding Torque : 2.3kg*cm5mm Diameter Drive ShaftWinding resistance: 32.6 ΩWinding inductance: 48 mHMax flux linkage: 1.8 VsMaximum Detent Torque: 0.016 N.MTotal inertia (kg.m.m): 3.5 Kg.m.mTotal friction (kg.m/s): 4 Kg.m/sNEMA 17 Mounting Hole Pattern (31mm)Motor Width: 42mm (1.67”)

The Actobotics Stepper Motor Mount - NEMA 17 < https://www.4476mountvernon.com/products/12987 > is compatible through the Stepper Motor via Cable. I was able to use 4x "M3 x 6mm x 0.5mm mounting screws" consisted of in the Actobotics stepper motor mount to affix it to the Stepper motor via Cable. The mounting hole pattern on the Stepper Motor through Cable provides the NEMA 17"s hole pattern.


Looks like the maximum stepper motor rate is about 240 RPM if you usage it via an Arduino microcontroller and also the EasyDriver. Check right here for the instance code that was supplied to test the stepper motor => https://github.com/bboyho/EasyDriver/blob/master/Firmware/Arduino/EasyDriver_StepperMotorWithCable/EasyDriver_StepperMotorWithCable.ino .

The number of steps for a full radvancement looks to be about 1600 micromeasures because the stepper motor via cable has actually a action angle of 1.8 levels (...360/1.8 = 200 action stepper ) and also the EasyDriver has a variety of 8 micromeasures for a complete step.


Core Skill: Robotics

This skill involves mechanical and also robotics understanding. You might need to know how mechanical parts interact, how motors work, or exactly how to usage motor motorists and controllers.


4 Robotics

Skill Level: Experienced - Your experiences have to include working through stepper motors and also feedearlier system. You may should understand how encoders and also even more complex control systems work-related. See all ability levels


Core Skill: DIY

Whether it"s for assembling a kit, hacking an enclosure, or producing your very own parts; the DIY skill is all about understanding just how to use devices and the methods connected with them.


1 DIY

Skill Level: Noob - Basic assembly is compelled. You might need to provide your own basic devices prefer a screwdriver, hammer or scissors. Power tools or custom components are not compelled. Instructions will certainly be contained and also basic to follow. Sewing might be required, however just via consisted of fads. See all skill levels


Core Skill: Electrical Prototyping

If it requires power, you have to understand how a lot, what all the pins execute, and exactly how to hook it up. You might must recommendation datasheets, schematics, and understand the ins and outs of electronic devices.


3 Electrical Protokeying

Skill Level: Competent - You will be required to referral a datasheet or schematic to recognize just how to usage a component. Your knowledge of a datasheet will certainly only need basic features favor power requirements, pinouts, or interactions type. Also, you might need a power supply that?s greater than 12V or more than 1A worth of present. See all skill levels


Looking for answers to technological questions?

We welcome your comments and suggestions below. However before, if you are looking for remedies to technological inquiries please check out our Technical Assistance web page.

See more: Wilmer Valderrama From Dusk Till Dawn, Wilmer Valderrama


This says it is a NEMA 16 but tbelow isn"t stepper motor mount - NEMA for actobotics but the video references it. Does this work with an additional mount that I simply can not uncover or is tbelow not a mount obtainable for this?


Hi, How warm are these steppers suppose to get? I am running them for 20 minutes, they are extremely hot. I could not uncover the data sheet almost everywhere.